Article: Structure/property relationships of thermoset coatings. (1991 Joseph J. Mattiello Memorial Lecture) (Cover Story)

Article: Effect of Melamine-Formaldehyde Structure on Cure Response of ...
The Journal of Coatings Technology;  October 1, 1999 ;     700+ words ... ... films. Etherified melamine-formaldehyde (MF) resins have been used for crosslinking thermoset coatings for over 60 years, [1,2] but coatings chemists are still learning more about cure response. Wicks et al [1] report that with 0 ...

Article: Effect of Crosslinker Reaction Rate on Film Properties for ...
The Journal of Coatings Technology;  May 1, 2000 ;     700+ words ...Rohm and Haas Company [*] INTRODUCTION Thermoset coatings play an important role in the coatings industry ... resistance. While there are many different types of thermoset coatings, they all have one thing in common: the chemical ...

Article: Epoxidized poly(decenyloxazoline) in thermoset ...
JCT Research;  January 1, 2006 ;     700+ words ... ... 3) In this article we discuss the modification of a polyoxazoline and the use of that modified polymer in thermoset coatings applications. The work reported involves the use of solventborne materials and is of a preliminary nature. A ...

Article: New polymeric polyol for thermoset coatings: ...
The Journal of Coatings Technology;  May 1, 2002 ;     700+ words ...Though free-radical emulsion polymerization has been studied extensively, published reports of cationic (i.e., acid-catalyzed) polymerizations of emulsified monomers are rare. It was recently discovered that treatment of an emulsion of liquid epoxy resin with select superacid catalysts yields a

Article: Waterborne Polymers for use in Thermoset Coatings: ...
The Journal of Coatings Technology;  February 1, 2002 ;     700+ words ...S.C. Johnson Polymer In an effort to obtain waterborne polymers which would yield ambient temperature cured films, we synthesized several acetoacetoxyethyl methacrylate containing copolymers. While cured films could be obtained if the copolymers were used to make films soon after they were

Article: Epoxidized fatty acid-derived oxazoline in thermoset ...
JCT Research;  March 1, 2008 ;     700+ words ...Introduction Currently, a significant amount of research and development in the coatings industry is directed at reducing the amount of petroleum-derived raw materials used in the industry's products. (1) The new products that result from this replacement must have performances equal to, or nearly

Article: The reactions of amines with melamine formaldehyde crosslinkers ...
The Journal of Coatings Technology;  December 1, 1995 ;     700+ words ...Amines have had a long history of use in melamine formaldehyde (MF) coatings. The primary uses are blocking agents for the acid catalyst and neutralization of acid groups as well as pH adjustment for waterborne systems. In the latter case, the level of amine in the coating will become quite