Article: Altuglas doubles acrylic impact strength.(ENGINEERING MATERIALS)

Article: Eastman Doubles Acrylic Dispersions at Sokolov to ...
Chemical Week;  June 27, 2001 ;     700+ words ...EASTMAN CHEMICAL HAS STARTED WORK on a phased expansion of its acrylates subsidiary, Chemicke Zavody Sokolov (Sokolov), says Godefroy A. Motte, newly appointed president of Eastman Chemical/Europe, Middle East, and Africa. The company will expand one of two acrylic acid lines by 50% in a first

Article: Impact strength improvement of polystyrene by ...
Polymer Engineering and Science;  September 15, 1996 ;     700+ words ... ... 1-3), To improve the impact strength of polystyrene (PS), the ... the dependence of MW on the Impact strength (falling ball impact) of ... press molded plates, the impact strength improved with increasing MW ...

Article: Izod Impact Strength of a Product Molded of ...
Polymer Engineering and Science;  March 1, 2001 ;     700+ words ...The Izod impact strength of a PVC (polyvinylchloride ... was suitably reduced, the Izod impact strength of the PVC/MOD molded product ... crosslinking agent, low Izod impact strength was exhibited. With the same ...

Article: Materials of construction for low-temperature and cryogenic ...
Chemical Engineering;  July 1, 2006 ;     700+ words ... ... its toughness, namely, its impact strength. Indeed, toughness can be ... toughness is a function of the impact strength: a notch-tough, and accordingly ... material possesses better impact strength than does a brittle one ...

Enhancement of Impact Strength of Natural Fiber and Hybrid ...
Composites in Manufacturing;  October 1, 2006 ;     700+ words ... ... strength, while it drastically reduces impact strength of the composites [3,4]. The ... balance of stiffness, strength and impact strength. In short, fiber-reinforced composites ... and flexible interface can improve impact strength of the composites [5-7]. The ...

Article: Comparison of Flexural Strength between Fiber-Reinforced Polymer ...
Military Medicine;  October 1, 2008 ;     700+ words ... ... matching that of the tested high-impact strength resin. Thermocycled specimens had ... partial improvement of flexural and impact strength. Subsequently, physical and mechanical ... were used to improve the flexural and impact strength.12-15 Most commonly used fibers ...

Article: Impact strength and elongation-to-break of ...
Polymer Engineering and Science;  September 1, 2004 ;     700+ words ... ... compatibilizers always increased the impact strength, it also always decreased, at least ... phr of each together), though the impact strength and elongation-to-break increased ... interfaces. In the present study, the impact strength and tensile elongation-to-break ...