Article: Vinyl/elastomer blends.

Article: Vinyl/elastomer blends.
Designfax;  January 1, 2000 ;     287 words ...Flexalloy OR vinyl/nitrile rubber blends provide exceptional oil resistance plus rubberlike ... costly copolyester TPEs and in thermosets such as EPDM and NBR. Apex vinyl/thermoplastic polyurethane (TPU) blends offer a cost-effective alternative ...

Article: Morphology and rheological properties of polypropylene/reactive ...
Polymer Engineering and Science;  October 1, 2002 ;     700+ words ... ... binary immiscible blends of polypropylene (PP) and an elastomeric phase, a 50/50 blend of two miscible copolymers, ethylene vinyl acetate (EVA) and ethylene methyl acrylate (EMA), was modified by varying the composition and the viscosity ratio in the ...

Article: Effect of dynamic vulcanization on the microstructure and ...
Polymer Engineering and Science;  October 1, 2002 ;     700+ words ... ... thermoplastic induced by free radical generation. In a recent work by Verbois et al. (11), a TPV blend based on ethylene-vinyl acetate and polypropylene was produced by extrusion using a silane as the crosslinking agent. The evolution of the morphology ...

Article: Optimizing the balance between impact strength and stiffness in ...
Polymer Engineering and Science;  January 1, 2008 ;     700+ words ... ... component in the isotactic polypropylene/elastomer blends seems a good alternative [40-42 ... strength and flexural modulus) of iPP/elastomer blends with SEBS and EO elastomer. EXPERIMENTAL ... reach a uniform distribution of the elastomer. Blends with and without nucleating agent ...

Article: New smart conducting elastomer blends of bi-based ...
Polymer Engineering and Science;  March 1, 2009 ;     700+ words ... ... of the filler in the polymer matrix, the interaction between the components, and the amount of the filler (6-10). Elastomer blends are used for many reasons such as less compound cost, the ability of the product to be more easily fabricated into complex ...

Article: New developments in metallocene ethylene [alpha]-olefin ...
Rubber World;  October 1, 2004 ;     700+ words ...A sizeable fraction of thermoplastic resins produced today includes blends of two or more polymers, permitting materials scientists to economically create new materials with optimized properties (refs. 1 and 2). In the 1960s, Shell commenced to work with living polymerization, exploring the

Article: Structure and properties of in situ compatibilized ...
Polymer Engineering and Science;  June 1, 2007 ;     700+ words ...INTRODUCTION In situ compatibilization technique is considered to be one of the most effective methods to enhance the properties of immiscible polymer blends. The key factor for achieving in situ compatibilization of immiscible polymers is to form a copolymer by chemically combining the polymer