SMT high-voltage Inverter Transformer.(Transformers, Inductors & Magnetic...

ECN-Electronic Component News;  December 1, 2003 ;     176 words ......fluorescent lamp (CCFL) Inverter Transformer Series in an SMT package. This device is used in power supplies for producing the high...20V, 15V, 13V or 10.5V with outputs of 1,300V, 70 mA. The SMT package measures 26 mm x 16.5 mm x 7.1 mm and features a multi-sectional...

RGB LEDs for accent and color-changing lighting...

ECN-Electronic Component News;  April 1, 2005 ;     204 words ......density and brightness for good color mixing. The LED's six-pin SMT package allows for individual control of each red, green and blue...LED to be driven up to 3X harder than a standard full color SMT package, according to the company. Additional product features include...

One-watt, high isolation SMT DC/DC Converters.(Integrated Circuits &...

ECN-Electronic Component News;  September 1, 2005 ;     98 words ......Direct was designed to provide high input/output isolation levels in a miniature SMT package. These units provide 3,000V DC isolation in a miniature SMT package. Eleven models operate from 3.3V, 5V and 12V DC inputs, providing single outputs...

SAW filters. (Communications).

EDN Europe;  December 1, 2000 ;     46 words ...* Ultra-small packaging, in 3 X 3 mm and 2.5 X 2 mm leadless format * Applications in wideband CDMA designs at 1.95 and 2.14 GHz * Insertion loss under 4dB, high stop band attenuation * 50...

PCTF Approach Saves MW/RF Component/Module Costs

Microwaves & RF;  March 1, 2007 ;     700+ words ......technology to fabricate the ceramic SMT package, the ceramic substrate is always the base of the leadless SMT package (Fig. 1), with either a b-stage epoxy-attach...materials are not permitted. A PCTF SMT package includes three noteworthy features...

Ceramic Diplexer.(Brief Article)

Microwave Journal;  June 1, 2001 ;     53 words ......insertion loss is 2.5 dba. The 10 dB BW is 75 MHz and TX/RX isolation is 22 dB. The diplexer offers 2 poles per channel and handles 5W CW. SMT package is standard. Options include custom frequencies and rejection points. Size: 1.10 x 0.47 x 0.31 .

Anti-vibration, low impedance SMT electrolytics. (Passive & Discrete...

ECN-Electronic Component News;  November 1, 2002 ;     84 words ......and moving environments in conditions 30x the force of gravity. The capacitance value is 330 [micro]F at 100 V in an SMT package. Pricing is $0.63 each at 10,000 pieces. JARO Components; www.jarocomponents.com. Write in 268 or www.ecnmag.com/info

ERRATUM.(Abstract)

Microwave Journal;  January 1, 2001 ;     54 words ...In A Voltage Variable Attenuator Using Silicon PIN Diodes and a Passive GaAs MMIC in a Plastic SMT Package, a product feature by M/ACOM Inc. that appeared in the November issue of Microwave Journal, the two equations appearing in Figure...

M-tron Industries: Surface Mount VCXO.

Wireless Design & Development;  October 1, 2001 ;     92 words ......frequencies between 750 kHz and 650 MHz, these VCXOs provide either LVPECL or LVDS compatible outputs in a standard 5 X 7 mm leadless ceramic package. The UVV products offer absolute pull ranges (APR) from [+ or -] 25 ppm to [+ or -] 100 ppm, -40 [degrees...

M/A COM: Vector Modulator.(M/A-COM SA90-0001)(Brief Article)(Product...

Wireless Design & Development;  July 1, 2001 ;     152 words ......simultaneously allowing the insertion phase to be adjusted over a full 360 [degrees] range. This function is accomplished in a 6 mm x 4 mm leadless FQFP-N plastic surface mount package tat dramatically reduces the required printed circuit board area. The variable phase...

Tri-color wide-angle LEDs.(Optoelectronics & Displays)

ECN-Electronic Component News;  December 1, 2003 ;     145 words ...Tri-color red-green-blue and amber-green-blue LEDs from Stanley are said to offer brilliant color and brightness in a 0.7 mm high SMT package that makes them suitable for high-density miniature display backlighting and indicator applications. With a luminous intensity...

Oscillator: low noise.(MOTION CONTROL)

Design News;  February 27, 2006 ;     54 words ......provide a low noise, low jitter VCSO with true SineWave Output. The resulting oscillator features 135dBc/Hz phase noise at 10 KHz offset. Model number CVCSO-914-1000 comes in a 9 x 14-mm SMT package. Crystek Crystals Corp. http://rbi.ims.ca/4915-614

Low noise amplifiers.(New Waves: EuMW Product Showcase)

Microwave Journal;  September 1, 2004 ;     66 words ...These PHEMT low noise amplifiers (LNA) are gain block, linear wideband, two-stage and MCM balanced SMT package hybrid amplifiers. These LNAs do not require additional parts, matching or testing. The amplifiers offer a noise figure of 0.6...

MEMS sensor provides 3D orientation info.(SENSORS)

ECN-Electronic Component News;  September 1, 2008 ;     83 words ...Consolidating multiple sensor functions in a single 14-pin LGA ECOPACK SMT package, STMicroelectronics' FC30 sensor provides 3-D orientation as well as click detection to recognize mouse-button controls. Accepting...

VCXO oscillators: Connor-Winfield Corporation.(NEW PRODUCTS)

Wireless Design & Development;  October 1, 2003 ;     94 words ...Connor-Winfield's V71 family of voltage controlled crystal oscillators (VCXO) are hermetically sealed in a 3.2 x 5.0 mm SMT package. This HCMOS VCXO is available in either 3.3V or 5V versions with a pull range of [+ or -] 100 ppm minimum. Stabilities are...